50L Rotary Evaporator w/ Motorized Lift 220V
SKU:BRE-500
Click here to download manual instruction
Working principle and scope of application:
Laboratory equipment Rotary evaporator is mainly used for continuous distillation of a large number of volatile solvents under reduced pressure conditions. In particular, the reaction product can be isolated and purified by concentrating the extract and distilling the receiving liquid upon chromatographic separation. The basic principle of rotary evaporator is vacuum distillation, that is, under reduced pressure, the distillation flask is continuously rotated hen the solvent is distilled.
Features:
Ⅰ. Solvent Resistant, Reliable Performance
Made with all PTFE valves for solvent-resistant operations. Comes with vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently.
Simple, straight-forward operation using our digital PID controller. Easily control the temperature, RPM, and water bath with expert precision.
Ⅱ. Digital Water Bath
Operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power if a problem is detected.
Ⅲ. Standard Glassware Set
All glassware is high borosilicate glass 3.3! Includes a 2L pear-shaped evaporating flask, 1L round-bottomed receiving flask, and vertical condenser.
Specification:
Index |
BRE-500 |
Rotation speed |
20~110 rpm |
Bath temp. control range |
RT+5~99 ℃ |
Speed setting |
Knob setting +LCD controller |
Lifting method |
Manual electric |
Water bath heating method for water bath |
Built-in heating |
Main motor |
DC brushless |
Cooling area(㎡) |
1.15+0.607 |
Vacuum seal |
PTFE+Teflon coating |
Material of water bath |
Stainless steel corrosion resistant coating |
Heating Power |
5300W |
Ambient Temperature |
5~35℃ |
Bath Dimensions(inner) φ×H (mm) |
∅540*340 |
Power Consumption |
220V 50/60HZ |
Note: This product is available with a recirculating chiller and a corrosion-resistant diaphragm pump!
Operating panel:
⑴ REV: Measured speed window;
⑵ TEMP: Measured temperature window;
⑶ RUN: Heating or rotating indicator, it will display when in heating or rotating status;
⑷ Heating indicator: It will display when there is a heating output;
⑸ REV SET: Display setting speed, or display parameter value;
⑹ TEMP SET: Display setting temperature, or display parameter value;
⑺ Rotating indicator: Lights when rotating;
⑻ “”Key:turn on or turn off rotation function;
⑼ “”Key:adjust the height of the host, press and hold this key can raise the water bath automatically;
⑽ “”Key:adjust the host height, press and hold this key can lower the height of water bath automatically;
⑾ “”Key:turn on or turn off heating function;
⑿ Knob key:Rotate left and right to set the time, temperature, and speed values.
Package includes:
Serial no.
|
Category
|
Name
|
Unit
|
Quantity
|
Remarks
|
1
|
Components
|
Host
|
Set
|
1
|
|
2
|
Components
|
Pole
|
PC
|
1
|
|
3
|
Components
|
Glassware
|
Set
|
1
|
Evaporating flask, Receiving flask, Main and secondary vertical condense, Rotating shaft , replenishement valves, fixing flange, seal ring
|
4
|
Components
|
Clamp holder
|
Set
|
1
|
|
5
|
Components
|
Bracket
|
Set
|
1
|
|
6
|
Spare parts
|
Nozzle SET
|
PC
|
5
|
|
7
|
Spare parts
|
Fuse
|
PC
|
1
|
|
8
|
Document
|
Use manual
|
Copy
|
1
|
|
12
|
Document
|
Packing list
|
Copy
|
1
|
!!!Precautions!!!:
HFS warrants that the Product (“Product”), when properly used and installed in conformance with HFS’ specifications for such Product, will be free from defects in materials and workmanship and will substantially conform to HFS specifications for such Product during the Warranty Period.
What does this limited warranty cover?
This Limited Warranty applies to new HFS Products purchased from an authorized HFS dealer by the original purchaser for normal use and not for resale. Warranty covers Products which cease to operate correctly due to no fault of the customer, at HFS' sole discretion.
How long does limited warranty coverage last?
HFS Product warranties last for different periods of time. To determine the warranty period for your specific Product, please visit www.HardwareFactoryStore.com/contact-us/. A valid proof of purchase may be required to prove eligibility. If you do not have a valid proof of purchase, the limited warranty period will be measured from the date of sale from HFS to the authorized distributor. Warranties are non-transferable, only the original purchaser will receive warranty benefits.
My Product has failed, now what?
If you are having trouble with a Product, before seeking limited warranty service, first follow the troubleshooting procedures that HFS or your reseller/distributor provides.
To obtain limited warranty service, you must first submit a Return Merchandise Authorization at www.HardwareFactoryStore.com/contact-us/
What will HFS do?
HFS will replace the Product with a functionally equivalent replacement Product, transportation prepaid. HFS may replace your Product with a product that was previously used, repaired and tested to meet HFS specifications. You receive title to the replaced Product at delivery to the carrier at the HFS shipping point and HFS retains title to the returned Product. You are responsible for importation of the replaced Product, if applicable. HFS warrants that the replaced Products are covered for the remainder of the original Product warranty or 90 days, whichever is greater.
What does this limited warranty not cover?
The limited warranty does not cover damage resulting from misuse, accident, negligence, modification or alteration to hardware or software, tampering, unsuitable physical or operating environment beyond Product specifications, improper maintenance, or failure caused by a product for which HFS is not responsible. There is no warranty of uninterrupted or error-free operation or defects in design. There is no warranty for loss or damage of valuables please test equipment before putting into use. There is no warranty for Product with removed or altered identification labels. HFS DOES NOT PROVIDE ANY OTHER WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF IMPLIED WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU. HFS is not responsible for returning to you product which is not covered by this limited warranty. Warranties do not cover consumable maintenance items which are designed to be replaced periodically such as: gaskets, seals, cutter blades, pump oil, cutting sticks, etc.
How is our liability limited?
HFS AND ITS AFFILIATES, SUPPLIERS, DISTRIBUTORS, AND RESELLERS ARE NOT LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES 2) LOSS OF, OR DAMAGE TO, YOUR VALUABLES; OR 3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF INFORMED OF THE POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW LIMITATION OF LIABILITY, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. HFS reserves the right to modify these warranty terms at any time.
Specifically Not Covered:
Some parts of certain products are specifically not covered by warranty. The reason for this is that these parts have been found to be damaged by user negligence, not as a result of manufacturer defect. Here is the current list of items specifically not covered:
Paper Cutters - Fence Knob, Safety Latch & Pin
How do local laws apply?
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION