HFS(R) 6x48'' Jacketed Material Column
MJIC 1/2 IN
Top Cap Manifold
Hemispheric End Caps
Tri Clamp Spool
Stackable Ring and Plate Set
High Pressure Clamp
Mesh Screen Viton Gaskets, 100 Mesh (150 um) + 40 Mesh (420 um)
Bottom Cap Dump Valve"
Material: Stainless Steel
Wall Density (MM): 3
Max Temp. (F): 250
Max Pressure (PSI): 100
Injection Type (IN): MJIC 1/2
Evacuation Type (IN): MJIC 1/2
Jacket OD (IN): 8
Jacket Length (IN): 44
Diameter (IN): 6
Height (IN): 48
Radius (IN): 3
Volume (Cu In): 1356.48
Butane Capacity (LBS): 24 - 30.00
Propane Capacity (LBS): 19.00 - 23.75
Biomass Capacity (LBS): 7.00 - 10.00
Fluid Capacity (L): 15.83
Fluid Capacity (Gal): 4.19
We inject 100 PSI of AIR +? 50 PSI NITROGEN and hold for 30-45 min.? "
Top: CLS-TOP-CAP-UPGRADE $160
Adds a third valve to allow isolation.? Facilitates the throughput of solvent from one cap to the other.? The top cap will serve as a solvent distributer since a third valve will serve as an isolating element.? The strategically placed gauge will allow for the same control of this element as a traditional cap would.?
Bottom: CLS-BOTTOM-CAP-UPGRADE $250
Facilitates the throughput of material from one cap to the other.? The bottom cap will serve as a material distributer since a third valve will serve as an isolating element.
**this will require shorter hoses.
For Columns that will be mounted on the receiving vessel.?