Dental Tattoo Sterilizer Salon Scissor Autoclave Disinfection Cleaner Pot
HFS
SKU: XDQ-501
FREE USA SHIPPING
HFS XDQ-501 Professional Dry Tattoo Sterilizer Scissor Autoclave Disinfection Tool
Specification:Special design sterilizing beauty tools include nail cutter. tattoo needle. eyebrow nip. scissors. nail nipper. etc.Highest temperature 330F (165 C)The sterilizer constantly monitors it's temperature and turns on/off to keep it at the perfect level for disinfecting.
pecifications
1. Automatic temperature regulator. automatic power on/off
2. Aluminum inner pot
3. Includes quartzite
4. Initial heat-up time 12-18 minutes
How to use:
1. Put the tool sterilizer on a stable surface.
2. Open the lid. pour quartzite into the pot; fill quartzite up to 80% of the inside capacity.
3. Connect the power. and turn on the switch. The light turns red and the product begins to heat at the same time.
4. After 12 - 18 min of heating. insert the tools (scissors. razors. nail cutter. etc) into quartz sand vertically.
5. Wait for 20--30 seconds. and pull tools out of the machine.
6. When the inside tank reaches the setting temperature. the light will automatically turn off and the sterilizer will stop heating.7. The sterilizer will heat up automatically when the temperature gets lower than 135 degree. The indicator light will turn on again.
WARNING: Tools may be hot to touch!
HFS XDQ-501 Professional Dry Tattoo Sterilizer Scissor Autoclave Disinfection Tool
Specification:Special design sterilizing beauty tools include nail cutter. tattoo needle. eyebrow nip. scissors. nail nipper. etc.Highest temperature 330F (165 C)The sterilizer constantly monitors it's temperature and turns on/off to keep it at the perfect level for disinfecting.
pecifications
1. Automatic temperature regulator. automatic power on/off
2. Aluminum inner pot
3. Includes quartzite
4. Initial heat-up time 12-18 minutes
How to use:
1. Put the tool sterilizer on a stable surface.
2. Open the lid. pour quartzite into the pot; fill quartzite up to 80% of the inside capacity.
3. Connect the power. and turn on the switch. The light turns red and the product begins to heat at the same time.
4. After 12 - 18 min of heating. insert the tools (scissors. razors. nail cutter. etc) into quartz sand vertically.
5. Wait for 20--30 seconds. and pull tools out of the machine.
6. When the inside tank reaches the setting temperature. the light will automatically turn off and the sterilizer will stop heating.7. The sterilizer will heat up automatically when the temperature gets lower than 135 degree. The indicator light will turn on again.
WARNING: Tools may be hot to touch!